template_main.jpg

An enhanced scope with independent X-Y control option, plus time scaling

Tube amp simulation with variable clipping hardness,bias (from symmetrical to rectified), and power supply regulation.

Multitap delay with filter. Primarily for simulating the resonances within acoustic instruments and speaker cabinets, but can be used as a general-purpose delay up to 1 second in length.

Ringmod modules pack. In return for the donation (to Johan)an additional pack of 5 ringmod modules will be shipped.

Samples audio input following gate signal, then plays random-length portions of the buffer to give the effect of an echo with random delay times.

stereo-base-modifyer

simpel-surround-decoder

simpel-surround-encoder

A Reverb Effect, Based On excelent Jezar Freeverb

Unkargherth,David Haupt

A delay Unit with a low pass filter in the feedback chain

A set of 5 Biquad, 24 Db filters. Bandpass, LowShelf, Hishelf,Multimode and a 5 Band EQ

A kind of Moogish VCF

analog approximations, but using highly optimized code

Very simple and fast LP filter

It smooths the value changes between current and next sample

A filter that outputs voweled sounds. Great for high Harmonic Content ( ie Sawtooth)

FlipFlops with variable Threshold, second invert Out.One of them with Set-Priority.

Set/Reset Flipflop logic gate

MIDI program channger

The LogiMod is a simple module that allows you to modify two input signals using 32 different algorithms. There are two types of algorithms: Modes and Axiom. Modes are simple math functions like "a+b". Axioms are more technical math functions (logarithm, morphing, terrain, etc.).

Sample-And-Hold.sep in two versions, the regular and the ungated.

Cuts the signal with the varHIGH and varLOW. Best with limits to zero.

4 way crossfade module a la Prophet VS, and a stereo module with pan controls on all inputs

More useful for for "natural" sounds than the "c,c#,d.."-tuner.this harmonic-tuner prefab is _ideal_ for fm/pm and additive synthesis etc

Calulates 'Voltage to List' voltages

A module that responds to external events, uses WIN32 event objects

Improved Math Evaluator. 3 built in constants (t, n, r) representing the time in seconds, the sample number, and the sample rate. Faster variable lookup.

Outputs constant value when input changes

Adjust responsiveness of sliders, etc

Replaces each cycle of input waveform with (transposed) synthetic waveform. More responsive than most frequency-discovery systems, but has additional Frequency/Amplitude outputs if you want to drive external oscillators or filters.

With the PatchTrigger(1..4) containers can decide to trigger themselves to another patch from inside

Debugging aid periodically writes to file

Useful for simple sums and products of inputs

Random automation module. Periodically changes value, either immediately or ramping from previous.

A math expression Evaluator, equivalent to the one in Waveshapper but without limits.More correct and slow

Provides workarround for CK_Unison modules. Insert between CK_Unison and MIDI-CV. Set MIDI-CV Channel=All. This modules spreads duplicate MIDI notes over several channels, This allows the synth to play multiple copies of the same note (otherwise would only retrigger a single voice).

Performs 3 related functions. (1) A flexible envelope follower, with choice of peak, absolute-value, and RMS (root mean square) averaging. (2) Gate generator using de-noised audio input. (3) A de-noise filter.

Low (or high!) frequency oscillator. Offset input is useful for creating tremolo effects. Phase input is useful for stereo effects. Frequency and Phase inputs can safely be modulated by secondary FMLFO's for frequency and phase modulation. You can chain as many as you like.

Generates impulse waveform

Generates noise which can be varied from white noise (uniform probability distribution) to a sparse, static' noise (cauchy distribution). The intensity can be controlled via an external gain or envelope input.

A random Out Generator. In continuous or gated Mode